Manitowoc Ice - SN12

Below are all the different types of Manitowoc Ice. Select the device of your choice, to download the manual

Contents

Manitowoc SN12 SN20 Model Nugget Ice Machines Cutter Head Replacement Instructions 1 Disconnect water supply 2 Remove front panel 3 Move toggle switch to CLEAN position after the 5 minute delay expires The evaporator and float chamber will drain 4 Disconnect power at electrical disconnect Awivrning Disconnect power to the ice machine at the electrical disconnect moving the toggle switch to the off position will not disconnect line voltage 5 Remove top left and right side panels 6 Remove ice chute assembly NOTE if the ice wiper can not be hand removed place the handle end of a screwdriver against the ice wiper then tap the screwdriver counterclockwise with a hammer to loosen the ice wiper from the auger REMOVE ICE DAMPER REMOVE ...